Filter
Top Products
My own
70
Copyright © 2006 Nokia. All rights reserved.
The FM radio depends on an antenna other than the
wireless device antenna. A compatible headset or
enhancement needs to be attached to the device for the
FM radio to function properly.
You can listen to the radio with the built-in loudspeaker or
a compatible headset. When using the loudspeaker, keep
the headset plugged in the device. The lead of the headset
functions as the antenna of the radio, so let it hang freely.
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be
extremely loud.
You can make a call or answer an incoming call while
listening to the radio. The radio is turned off when there is
an active call. When the call is finished, turn the radio back
on manually.
The radio selects the used frequency band based on the
country information received from the network.
Visual Radio can be used for listening when the device
cover is closed. Channel information may be displayed on
the cover display. To mute or unmute the radio, press the
cover key.
Listen to the radio
Note that the quality of the radio broadcast depends on
the coverage of the radio station in that particular area.
Connect a compatible headset to the device. The lead of
the headset functions as the radio antenna, so let it hang
freely. Press , and select My own > Radio.
To start a station search, select or . Searching
stops when a station is found. To change the frequency
manually, select Options > Manual tuning.
If you have previously saved
radio stations, select or
to go to the next or
previous saved station. To
select the memory location
of a station press the
corresponding number key.
To adjust the volume, press
or . To listen to the
radio using the loudspeaker,
select Options > Activate
loudspeaker.
To view available stations based on location, select
Options > Station directory (network service).
To save the current tuned station to your station list,
select Options > Save station. To open the list of your