Filter
Top Products
Copyright © 2006 Nokia. All rights reserved.
Internet
73
If you are connected to a wireless LAN, the IAP name is
displayed. To start the web browser using this IAP, select
the status and the option Continue Web browsing. To end
the connection in the wireless LAN, select the status and
the option Disconnect WLAN.
If wireless LAN scanning is off and you are not connected
to any wireless LAN, WLAN scanning off is displayed. To
set scanning on and search for available wireless LANs,
select the status WLAN scanning off.
To start a search for available wireless LANs, select a status
and the option Search for WLAN. To set wireless LAN
scanning off, select a status and the option WLAN
scanning off.
To access the WLAN wizard in the menu, press , and
select Internet > WLAN wiz..
Wireless LAN access points
To search for wireless LANs available within range, press
, and select Internet > WLAN wiz.. To create an IAP in
a wireless LAN, select Options > Define access point. To
view the details of a network shown in the list, select
Options > Details.
When an application asks you to select an access point,
select the created access point. You can also create an IAP
by selecting Search for WLAN.
You can also use Conn. mgr. to create IAPs. See
"Connection manager", on page 82.
Operating modes
There are two operating modes in wireless LAN:
infrastructure and ad hoc.
The infrastructure operating mode allows two kinds of
communication: wireless devices are connected to each
other through a wireless LAN access point device, or
wireless devices are connected to a wired LAN through a
wireless LAN access point device.
In the ad hoc operating mode, devices can send and
receive data directly with each other. To create an IAP for
an ad hoc network, see "Access points", on page 99.