Nokia PM 3205 Cell Phone User Manual


 
Section 2D: Controlling Your Roaming Experience 61
Controlling Roaming Charges Using
Call Guard
Your phone has two ways of alerting you when you are roaming off
the Sprint Nationwide PCS Network: the roaming icon and Call
Guard. Call Guard makes it easy to manage your roaming charges by
requiring an extra step before you can place or answer a roaming
call. (This additional step is not required when you make or receive
calls while on the Sprint Nationwide PCS Network.)
To turn Call Guard on or off:
1. Press Menu, scroll to Settings, and press Select.
2. Scroll to Roaming and press Select.
3. Scroll to Call guard and press Select.
4. Highlight On or Off and press Select.
To place roaming calls with Call Guard on:
1. From the standby mode, enter a phone number. (You can also
initiate a call from the Phone Book and Call Logs.)
2. Press . (The message “Roaming rate applies. Place call?”
is displayed.)
3. Press OK to place the call.
To answer incoming roaming calls with Call Guard on:
1. To answer a roaming call (the message “Roam call” is
displayed), press Answer. (The message “Roam rate applies.
Answer call?” is displayed.)
2. Press OK to accept the call.
.
Note:
Voice Dialing and Speed Dialing are not available when you are roaming
with Call Guard enabled.
Reminder:
If the Call Guard feature is set to On, you need to take extra steps to
make and receive roaming calls, even if you have selected the
Analog setting. (See "Setting Your Phone’s Roam Mode" on page 60).