Filter
Top Products
Section 2K: Additional Features 119
Using Voice Commands to Operate Your Radio
You can create voice commands that operate your radio when you
speak them.
To create voice commands:
1. From the standby mode, press Menu, scroll to Settings, and
press Select.
2. Scroll to Voice commands, press Select, scroll to Radio, and
press Select.
3. Scroll to Radio on, Radio off, Next channel, or Previous channel,
depending on the command that you want to create, then
press Options.
4. Scroll to Add command and press Select.
5. Press Start and speak your command after the tone
.
6. To review, change, or delete the voice command, press
Options, scroll to select the action, and press Select.
To use voice commands:
1. From the standby mode, press and hold the key for two
seconds. (The key is below Contacts).
2. Speak your command after the beep. (If a voice match is found,
the phone executes the command.)
Tip:
You could say “Next station” or other words when creating a voice
command for Next channel. The phone does not understand the words,
it only remembers the sounds. The same is also true for other commands.
Note:
To use voice commands to operate the radio, the radio must be on and
the phone in the standby mode.