Nokia Suite 6.7 Cell Phone User Manual


 
2.5 Changing the language used in Nokia PC Suite
If you have a Nokia PC Suite installed and you want to change the language Nokia PC Suite
applications use, do one of the following:
To install the same version of Nokia PC Suite in another language: uninstall Nokia PC
Suite and then select to reinstall it in the new language from the CD-ROM or from the
Nokia PC Suite Web pages.
To install a newer version of Nokia PC Suite in another language: select to install the
Nokia PC Suite in the new language. The old version of Nokia PC Suite and language
are automatically replaced during the installation.
Note: You should use the same language in the phone, the operating system, and Nokia
PC Suite, if possible. This allows your phone to function properly with all Nokia PC Suite
applications.
2.6 Installing drivers
Most drivers are installed automatically when Nokia PC Suite is installed and when you
connect your phone to the PC in the Get Connected wizard.
You need to have the following drivers installed on your PC:
Connectivity drivers so that you can connect your phone and the PC to use Nokia PC
Suite applications.
Modem drivers if you want to use your phone as a modem when there is no wired
network available. By using your phone as a modem you can connect to network
services such as the Internet, for example, with the Nokia PC Suite’s One Touch
Access application. If you do not want to use your phone as a modem, you do not
need to install modem drivers.
The following table shows the required drivers, and if they are installed automatically or if you
need to install them manually after installing Nokia PC Suite.
Connection type Connectivity drivers needed
to connect the phone and PC
Modem drivers needed to use
the phone as a modem
USB cable DKU-2,
DKE-2, CA-53
Serial cable CA-42
Cable drivers and modem drivers are automatically installed with
Nokia PC Suite.
Infrared Installed automatically. Nokia infrared modem is installed
automatically when you connect
your phone to the PC via infrared.
If you are using Windows XP SP1,
you must update the Nokia xxxx
IrDA driver (xxxx is the model
number of the phone) when you
have installed Nokia PC Suite.
6/26