Filter
Top Products
❶ Press the Soft key []] that indicates the current Text-
input mode.
❷ Toggle to the mode you want to use by pressing the Soft
key []] again as many times as necessary.
To insert a space
To insert a space between words, press the [0] key. If you
are in 123 mode or Symbol mode, press and hold the [0]
key to add a space.
Scrolling
To move the cursor to the left or right within the text, push
the joystick Left [l] or Right [r]. To move the cursor up or
down among the lines, push the joystick Up [u] or Down
[d].
Clearing Letters and Words
To clear the letter to the left of the cursor, press the [c]
key.
To clear all of the letters in the editor box, press and hold
the [
c] key.
Returning to the Previous Screen
When the text input field is empty, press the [c] key to
return to the previous screen.
Using T9 mode
In the T9 alphabet Editor, most commonly used words
appear as you input the text.
❶ Press the keys numbered [2] to [9] to input text. For
example, press [4][3][5][5][6] in sequence to
input ‘hello’. The word you are typing appears on the
Entering text
36
NOTE
By pressing the [z/x] key, the cursor can be moved very
quickly to the beginning or the end of the text.
Tip
Use the following procedures to change the text input
mode quickly in English mode (the Alphabet or Predictive mode):
Key Function
Press and hold
the [*] key
Display the symbol screen. Return to
the previous screen in Symbol mode.
Press the [0]
key
Enter a space character.
Press the [c]
key
Delete characters one by one. After
deleting all the characters, return to the
previous screen.
Press and hold the
[c] key
Delete all the characters and move
the cursor to the beginning of the input
screen.
060613_C120_EN_REV01.indd 36 2006.6.13 4:56:49 PM