Pantech C120 Cell Phone User Manual


 
Press the [Menu] Soft key, select 9.Settings, select
4.Phone, and then select 1.Language to select a language
for the display.
Time & Date
This function allows you to set the time and date displayed
on your phone.
Press the [Menu] Soft key, select 9.Settings, select
4.Phone, and then select 2.Time & Date.
You can set up Time, Time Format and Date, and Date
Format by pushing in on joystick.
If you select On for Automatic, the time and date are
updated automatically.
Flight Mode
Press the [Menu] Soft key, select 9.Settings, select
4.Phone, and then select 3.Flight Mode.
After you select Flight Mode On, you cannot call or receive
calls. This mode enables you to cut off the radio session
but maintains power to other ancillary functions such as the
calendar, games, and other features. This mode supports
use of these features in environments where transmitters
or receivers are not allowed, such as on an airplane. If you
select Flight Mode Off, your phone reboots.
Security
The security settings enable you to restrict the use of your
phone to specific people and types of calls.
Codes and passwords are used to protect these features of
your phone.
They are described in the following sections. See also
2.Access codes in the Appendix, on page 86.
The security settings enable you to restrict the use of your
phone to specific people and types of calls.
Your phone’s security features keep your phone and SIM
card safe from unauthorized use. You can either set a
password for your phone or use the Call Barring service
and Fixed Dialing mode to restrict which calls can be made
using your phone.
Press the [Menu] Soft key, select 9.Settings, and then select
5.Security.
PIN1 Check
Push the joystick Left [l] or Right [r] and push in on
joystick for setup. If you input the incorrect PIN1 code three
consecutive times, you will be prompted to input the PUK1
number. The default is disabled.
79
Settings
NOTE
Select Automatic to set the language as English.
060613_C120_EN_REV01.indd 79 2006.6.13 4:57:2 PM