Philips Cell Phone Cell Phone User Manual


 
Getting Started
Replace the battery and the back cover
With the metallic contacts facing downwards, press the
battery down into its slot until it locks into place. Note
that the hinge should be at the bottom of the phone.
Press down the back cover until it locks into place.
When inserting the battery, be careful not to
damage the metallic connectors of the SIM card
slot.
Power on the phone
To power on the phone, long press the power supply
key. Enter the PIN code if required (the 4 to 8 digit
secret code of your SIM card). It is preconfigured
and provided to you by your network operator or
retailer.
If you enter an incorrect PIN code 3 times in
succession, your SIM card will be blocked. To
unblock it, you must obtain the PUK code from
your network operator.
Power off the phone
At all times, you can long press the power supply
key to power off the phone.
Charging the battery
Your phone is powered by a rechargeable battery.
The new battery is partially charged. A sound alert
will be emitted to warn you when the battery level
becomes low.
We recommend that you do not remove the
battery when the phone is powered on as you may
lose all your personal settings as a result. If you
do remove it, the date and time settings are only
memorized for a short while. As such, you may
need to reset the information after you have
installed the battery back again.
9
P699_EN 8/23/07, 5:17 PM10