Filter
Top Products
33
User Profiles
9.User Profiles
Your mobile phone comes with various user profiles
for you to set your mobile phone’s ring tone
according to the environment.
General: For use under general circumstances.
Meeting: For use in meetings. This requires
presetting (for example, Alert Type set to
Vibration Only).
Outdoor: For use when outdoor. For example,
you can set a higher volume for the earpiece and
the ring tone.
Indoor: For use when indoor.
Headset: For use when using the headset. It will
be activated automatically when you insert the
headset into your mobile phone. For example,
you can set a lower volume for the earpiece and
the ring tone.
Bluetooth: When you have successfully connected
the bluetooth headset.
These six profiles have already been set and the
default profile is “General”. In idle mode, long
press [*] key to quickly turn silent mode on or
off.
Press the up/down keys to scroll and select the
required profile, then press the left soft key Option
to carry out the following operations:
Activate: Activate the selected profile.
Customize: Customize the selected profile. Press the
left soft key OK to display the following menu:
Tone Setup: Customize different ring tones with
different options, for example, Incoming Call,
and so on.
Power on and Power off tone cannot be changed.
Volume: Two types of volume can be set; Ring
Tone (including incoming call, alarm, power on,
power off, message tone) and Key Tone (associated
with key presses).
Alert Type
: This option allows you to set the alert
type. You can select only one option from Ring,
Vibration Only, Vibra and Ring and Vibra Then Ring.
Ring Type: This option allows you to set the ring
type -- Single, Repeat or Ascending.
Extra Tone: You can turn the tone On or Off as
follows: Warning, Error, Camp on and Connect.
Answer Mode: You can select different modes of
answering: Any Key (except for the Power Supply
key, Right Soft key) and Automatic (available only
when the headset is inserted).
P699_EN 8/23/07, 5:17 PM34