Filter
Top Products
Camera 148
Take and Send
4. Highlight Take and Send and press the Select soft key or the key.
5. Adjust the image by aiming the camera at the subject.
6. Prior to taking a picture, press the Options soft key to access the camera
options. For details, see "Configuring Camera Options" on page 150.
Tip: You can use the keypad to quickly change the camera options.
7. Press the or key to take the photo. The screen displays the
Send to: My Album Online ? option.
8. Press the key, which shows as on the display before you save
or send the photo to a location, to record an audio clip to be attached to the
photo. Press the Stop soft option key to end the recording.
9. Once you have completed the audio clip or if you do not want to add an
audio clip, press the Yes soft key if you want to send the photo to your T-
Mobile My Album Online service. The phone’s default destination is set to
My Album. The photo is automatically saved in the Photos folder in the
phone.
Note: To change the default destination for your pictures, press the Options soft key when Send to: My
Album Online? displays on the screen. Highlight the Default destination option and the Change
option. You can then change your default destination to a Recent recipients, Phonebook, Phone
number, Email address, My Album, and My Journal.
10. To send the newly taken photograph, press the Options soft key.
11. Highlight Send to and press the Select soft key or the key.
12. Select from one of the following destinations by pressing the Up or Down
Navigation key:
• Recent recipients: allows you to send to one of the recent recipients.
• Phonebook: allows you to select a recipient from the phonebook.
• New recipient: allows you to enter the phone number and e-mail address of a
new recipient.
• My Album: sends the message to My Album.
• My Journal: sends the message to My Journal.
13. To return to Capture mode, press the Back soft key.
14. Press the Options soft key and select Take another.
15. Press the key to take another picture.
16. Press the key to return to the Idle mode.
REC