Filter
Top Products
Call Functions 19
Example:
For location number 003, press and hold until the name and
number appear in the display and the number is dialed.
Two-Touch Dialing
Speed Dial numbers 010 through 099 are Two-Touch dialing
numbers.
Example:
For location number 013, briefly press , then press and hold
until the name and number appear in the display and the
number is dialed.
Three-Touch Dialing
Speed Dial numbers 100 through 999 are Three-Touch dialing
numbers.
Example:
For location number 113, briefly press , briefly press
again, then press and hold until the name and number appear
in the display and the number is dialed.
Pause Dialing From a Contacts Entry
•
If you speed dial a contact that contains (two-second) P pause(s),
simply wait for the pauses to pass and the dialing to complete.
•
If you speed dial a contact that contains (hard) W pause(s), wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
In-Use Menu
You can access a number of menus and features while in a call.
1. While in a call, press the
Mute
/
Unmute
soft key to disable/
enable the microphone.
2. While in a call, press the
Options
soft key. The following
options pop-up in the display:
• Message
— Display the
Messages
menu.
•Contacts
— Display the Contacts
Find
screen.
• Recent Calls
— View your
All Calls
log.
• Send DTMF
— Send your phone number as DTMF tones to the
other person on the call.
• Voice Privacy
— When set to
Enhanced
, the phone sounds an
audible beep when you loose privacy (encryption) on a CDMA
connection.
•Location
— Turn your GPS location on or set GPS location for
emergency calls only.
•Speaker On
/
Off
— Enables/disables Speakerphone mode.
3. With the In-Use Menu showing, do one of the following:
•
To select a menu option, highlight a menu or feature by using the
navigation key, then press to open the highlighted menu or to
activate the highlighted feature.
•
To exit the In Use menu, press .