Samsung SCH r400 Cell Phone User Manual


 
60
Number types that are already assigned a number show the number
instead of the number type label.
4. Use the navigation keys to highlight the desired unassigned number type,
then press the key. The Contacts entry information appears in the
display with the new number posted in the appropriate number type field.
5. Press the key again to save your changes to the existing entry.
Speed Dial
A Contacts entry’s Speed Dial number corresponds to the number keys you press to
speed dial one of that entry’s numbers. For example:
To speed dial the Contacts entry assigned to Location 5, press and hold the
key, (1-touch dialing).
To speed dial the Contacts entry assigned to Location 35, press then press
and hold the key, (2-touch dialing).
To speed dial the Contacts entry assigned to Location 235, press , press
, then press and hold the key (3-touch dialing).
You can assign one or more Speed Dial numbers to a Contacts entry during new
entry creation or by editing an existing entry.
Assignment During Entry Creation
To assign a Speed Call number to a new Contacts entry number, do the following:
1. Follow either of the New Contacts entry procedures (see “Adding a New
Contacts Entry” on page 53) until you enter a name for the entry.
2. After entering the Contacts entry name, do not press the key. Instead,
use the navigation keys to highlight the number field.
3. Press the Options (right) soft key ( ). The following options appear in
the display:
Set Speed Dial — Assign a speed dial number.
•Set as default — Set the number the phone will dial when Contacts dialing,
speed dialing, or voice dialing.
•Wait — A hard pause (waits for input from you).
2-Sec Pause — A 2-second pause after which dialing resumes (see “Add
Pauses to Contacts Numbers” on page 55 for more information).
Pager
Fax
OK
OK
OK