Filter
Top Products
Call Functions 24
Making a Call
2-Touch Dialing
Use 2-touch dialing to speed dial Contacts from 10 through 99.
1. In standby mode, press and release the number key representing the first
digit of the desired Contact’s speed dial number.
2. Press and hold the number key representing the second digit of the
desired Contact’s speed dial number.
Example: To speed dial the Contact assigned speed dial 35, press or then press and hold
the key or the key.
3-Touch Dialing
Use 3-touch dialing to speed dial Contacts from 100 through 999.
1. In standby mode, press and release the number key representing the first
digit of the desired Contact’s speed dial number.
2. Press the number key representing the second digit of the desired
Contact’s speed dial number.
3. Press and hold the number key representing the third digit of the desired
Contact’s speed dial number.
Example: To speed dial the Contacts entry assigned to speed dial 325, press or , press
or , then press and hold the key or the key.
Voice Dialing
The voice recognition capabilities of your SCH-r410 are exceptional due to
advanced, speaker-independent technology. This means you do not need to “train”
your phone to understand your voice. You can use your voice in a natural manner to
dial numbers.
Note: End Calls Before relaunching the VoiceSignal voice recognition software — When you use
Voice Dialing to make a call, you must end that call before you can use other Voice Commands. See
“Voice SVC” on page 89 for more information.
Use the Call command to dial any number stored in your Contacts list by saying the
name of the contact (Name Dialing). You can also use Call to dial any telephone
number, even numbers not stored in your contact list, by speaking the individual
digits in the number (Digit Dialing).