Filter
Top Products
Understanding Your Contacts 50
Finding a Contacts Entry
Open Contacts
1. In standby mode, press the MENU (left) soft key ( ), then press
for Contacts. The following options appear in the display:
•Find — Find a phone number By Name.
Tip: You can also access the Find option from standby mode, by pressing the Contacts shortcut (Up
Navigation) key.
• Add New Entry — Add a number or e-mail address to your Contacts.
•Speed Dial — Assign a Contacts entry to a Speed Dial number. (See “Speed
Dial” on page 59 for more information.)
•Group — Review, send messages to, add Contacts to, or rename four out of
your five groups. (See “Contacts Groups” on page 61 for more information.)
• Memory Info — Display used and available memory for Contacts entries.
Tip: To launch the Contacts menu using a voice command — In standby mode, press and hold
until the phone prompts, “Say a command.” Say “Go to Contacts” into the microphone.
2. Use the Up/Down navigation keys to highlight the option of your choice,
and press the key.
Tip: You can also press the keypad number key that corresponds to the menu option number.
Finding a Contacts Entry
Voice Method
Use the VoiceSignal Lookup command to view contact information for any named
contact stored in your Contacts list by saying the name.
Note: The Lookup command shows the requested contact information in the display but does not dial any
phone numbers for the contact.
To look up information for a specific contact:
1. In standby mode, press and hold the key to launch VoiceSignal.
“Say a Command” appears in the display and is pronounced through the
speaker.
2. Say “Lookup”.
VoiceSignal prompts you to “Say the name.”
3. Speak clearly and say the full name of the person you want to call, exactly
as it is entered in your Contacts list.
OK