Filter
Top Products
Understanding Your Contacts 54
Editing a Contacts Entry
4. Use the Up/Down navigation keys to highlight the particular information
you want to add or change.
• Press to backspace and delete numbers or letters.
• Press and hold to clear all numbers or letters in the highlighted field.
• Press the Options (right) soft key ( ). The following options popup in the
display:
– Set Speed Dial / Remove speed dial — Assign/remove a speed dial number
(see "Speed Dial" on page 59. for more information).
– Set as default — Set the number the phone will dial when Contacts dialing,
speed dialing, or voice dialing.
– 2-Sec Pause — A 2-second pause after which dialing resumes (see "Add
Pauses to Contacts Numbers" on page 54. for more information).
– Wait — A hard pause (waits for input from you).
Use the Up/Down navigation keys to highlight the desired option, then press the
key.
5. When you’re finished changing the contents of a field, press the key.
Your changes are saved and a confirmation message appears in the
display.
Add Pauses to Contacts Numbers
Calls to automated systems such as banking services often require a password or
account number. Instead of manually entering these numbers, you can store them in
a Contacts entry with the phone number and with special characters called pauses,
up to a maximum of 32 digits.
• Wait — Stops the calling sequence until the phone receives further input.
• 2-Sec Pause — Stops the calling sequence for two seconds, then sends the
remaining digits.
Note: You can enter multiple Waits to extend the length of a pause. For example, two consecutive Waits
cause a total pause time of four seconds. Keep in mind that pauses count as digits towards the 32-
digit maximum.
OK
OK