Filter
Top Products
Using Voice-Activated Dialing
In addition to PCS Voice Command
SM
(see page 199),you can use a
voice dial tag to automatically dial a phone number in your Contacts.
(A voice dial tag is a command you record and use to place calls
without using the keypad.)Your phone can store up to 30 voice dial
tags. (To create a voice dial tag,see “Adding a New Contacts Entry” on
page 83 or “Editing a Contacts Entry’s Phone Number” on page 87.)
Making a Call Using Voice-Activated Dialing
To use a voice dial tag to call a phone number:
1. Press or Speaker(left softkey)briefly.
2. Follow the voice prompts and recite the entry’s Voice Dial tag
into your phone’s microphone.
Note:To use the Voice Dial function, you must have a stored entries for Voice Dial
(see “Programming Voice Dial Tags” below).
Programming Voice Dial Tags
To program a voice dial tag:
1. Press to access the main menu.
2. Select Voice Servicesand press .
3. Select Voice Dialand press .
4. Select Programand press . (The phone will prompt you to say
the name you want to program.)
5. Wait for the beep and then say the name.
6. Respond to the prompt by repeating the name after the beep.
7. Enter or highlight the Voice Dial entry (name)in the Contacts
list and press .
8. Select the labeled category that includes your desired phone
number and press .(The display shows “Voice Dial
Recorded.”)
Note:Record Voice Dial tags in a quiet environment and without the aid of an
accessory (for example, a headset or hands-free car kit).
Section 2I: Using Your Phone’s Voice Services 117