Support User Manuals

Sierra Wireless 20070914 Cell Phone User Manual

Open as PDF

of 171

Configuration Commands

Rev 3.0B Feb.08 105

&Dn

SetDTRmode.

• n=0:IgnoreDTR,sameeffectasHWDTRalwaysasserted

(sameasS211=1).

• n=2:UsehardwareDTR(sameasS211= 0).

&Sn

SetDSRmode.

• n=0:AlwaysassertDSR(Default).

• n=1:AssertDSRwheninadatamode(UDP,TCP,PPP,or

SLIP)(Default).

• n=2:AssertDSRwhenthemodemhasnetworkcoverage.

Tip: S211 can also be used to request that DSR is always asserted. If

S211 is set to 3 and &S is changed to a non-zero value, S211 will be

changed to 1.

\APPP

SetmodemoperationtoPPPmode.Cannotbeconfiguredin

AceManager.\ASLIP

SetmodemoperationtoSLIPmode.DTRmustbeasserted

(&D0orS211=1).CannotbeconfiguredinAceManager.

\Qn

Setorquerytheserialportflowcontrolsetting.

• n=0:Noflowcontrolisbeingused.

• n=1:RTS/CTShardwareflowcontrolisbeingused.

• n=4:Transparentsoftwareflowcontrol.Usesescaped

XONandXOFFforflowcontrol.XONandXOFF

charactersindatastreamareescapedwiththe@character

(0x40).@indataissentas@@.

+IPR=n

I/OPortRate:Setsthedataratefortheserialport(DTE‐DCE).

C3x11orC3x11Eonly.Defaultis115200.Cannotbeconfigured

inAceManager.

• n=portrate(45|50|75|110|300|600|1200|2400|

4800|9600|19200|38400|57600|115200|230400)

$QCVAD=n

ModeforansweringdataorfaxwiththeA(answer)orvia

autoanswer(S0=1).C3x10orC3x10Eonly.Cannotbe

configuredinAceManager.

previous next