Support User Manuals

Sierra Wireless 20070914 Cell Phone User Manual

Open as PDF

of 171

Raven 1x

134 20070914

Figure 2-1: AceManager : UDP > MD

TheRavenneedsacommandstringsenttothemodemafterit

isinitialized.Thecommandstringwillneedtobetailoredfor

yourapplication.DifferentmodelsoftheRavenmayrespond

differentlytosomeofthecommands.InthePassThrugroup,

typeyourcommandstringintheinputfieldfor

*PTINIT.

Figure 2-2: AceManager: PassThru

AT Commands and the Command String

Eachmodemrequiresacommandstringthatisacombination

ofATcommandslimitedtoamaximumof40characters.The

commandstringwillvarydependingontheneedsofthe

connecteddevice.Forexample,somedevicesneedDTRtobe

highwhileothersneedDTRtobeignored.Fora

fulllistingas

wellasparametersanddefaults,refertheATCommand

appendix.

Caution: The only commands that can be used in the string are

those which do not require ALEOS. All AT Commands beginning with

an * (asterix) require ALEOS.

Tip: The model number of your modem is on the label on the top of

the case (example, Raven 1x C3211-S or Raven CDMA C3210).

previous next