Support User Manuals

Sierra Wireless 20070914 Cell Phone User Manual

Open as PDF

of 171

Raven 1x

132 20070914

updatetheMDN.Changeswillautomaticallyupdatethe

AccessOverloadClassvaluesunlessspecificallymodified

using+WAOCcommand.

+WSID=[idx],[SID],[NID]

SetSIDandNID.C3x11andC3x11Eonly.

• idx=ThelocationintheSID/NIDlisttostorethevalues.

• sid=systemID

• nid=networkID

ThenewSID/NIDvaluesarecommittedtoNVwiththe

+WCMTcommand(AT+WCMT=1).Amaximumof20index

locations(0‐19)aresupported.Error22isreturnedifthe

specifiedindexvalueisnotinthe validrange.

~NAMVAL=nam[,min,msid,sid,nid]

Tip: It is recommended to use the Setup Wizard for your carrier to

provision the modem.

Writeaccountactivationdata.C3x10andC3x10Eonly.

Followingwritingthevalues,themodemmustbereset.

• nam=0

• min=phonenumber

• msid=secondnumber

• sid=0orthesystemID

• nid=63355orthenetworkID

Note: If ~NAMLCK has not been successfully executed, the modem

returns ERROR.

• nam=0

• min=phonenumber

• msid=secondnumber

• sid=0orthesystemID

• nid=63355orthenetworkID

previous next