Filter
Top Products
A P P E N D I X B
Remotelymanagingyour interactiveflatpanel
86 smarttech.com/kb/170446
Assigning a value for a video control setting
Use the set command to assign values for a video control setting. In the example below, the user
wants to set the contrast to 70 for the HDMI1 video input.
>set contrast HDMI1=70
contrast HDMI1=70
SMARTBoard8070i-G4-SMP interactive flat
panel commands
The following tables contain commands for SMARTBoard 8070i-G4-SMP interactive flat panels.
Power state
Use the following commands to identify power state settings.
Command Response Possible values Standby
mode
getintpowerstate intpowerstate=[Value] l standby
l on
l dpms-standby
l welcome
l prox-reenable-wait
l pre-standby
l pre-standby-auto
Yes
getpowerstate powerstate=[Value] l on
l ready
l standby
l off
Yes
getstandbymode standbymode=[Value] l normal
l eco
Yes
Use the following commands to assign power state settings.
Command Possible values Response Standby
mode
setintpowerstate[Value] l =standby
l =on
l =dpms-standby
l =welcome
l =prox-reenable-wait
l =pre-standby
l =pre-standby-auto
intpowerstate=[Value] Yes
setpowerstate[Value] l =on
l =ready
l =standby
l =off
powerstate=[Value] Yes
setstandbymode [Value] l =normal
l =eco
standbymode=[Value] Yes