Filter
Top Products
[25] Setup Menu
www.uniden.com
Setup Menu
Area Code
If you can make a call by dialing only 7 digits (instead of 10),
you can program your local area code in your phone. If you get a
call from within your area code, you'll only see the 7-digit
phone number. If you get a call from outside your area code,
you'll see all 10 digits.
To enter an area code, go to
Area Code
. Use the number keypad
to enter your 3-digit area code. Press the center of joystick
when you're finished.
Dial Mode
Your phone can communicate with the telephone network in two
different ways: tone dialing and pulse dialing. These days, most
phone networks use a method called tone dialing, so your phone
comes programmed for tone dialing.
If your phone company uses
pulse
dialing, you'll need to change
your phone's dial mode. There's an easy way to tell: try making a
call. If your call connects, your phone's setting is fine. If not,
go to
Dial Mode
and select
Pulse
. A confirmation tone tells you
you've changed the dial mode, and you can try making a call
again.
Global Setup
Area Code
Dial Mode
Using the
Interface
UP720.book Page 25 Wednesday, October 6, 2004 1:21 PM