Filter
Top Products
[65] Answering Machine
www.uniden.com
Answering Machine
Remote Operation
You can check, play, or delete messages when you are away
from home. You can also record, select, or delete your own
greeting message. To access your answering machine remotely,
you need a touch tone telephone and a two-digit security code
(see Setting a Security Code on page 58).
1) Call your telephone number and wait for the system to
answer. If Toll Saver is enabled, answering machine will
answer in 2 rings if you have new messages and 4 messages
if you don't. If the answering machine is off, it will answer
after about 10 rings and sound a series of beeps.
2) During the greeting message (or a series of beeps when the
answering machine is off), press 0 and enter your security
code within two seconds.
3) The answering machine announces the current time and the
number of messages stored in memory. You hear "To play
incoming messages, press zero-two. For help, press one-
zero." Then, you'll hear a beep.
•The system will only
playback messages for
four minutes and then
it returns to the
command waiting mode.
•To continue playing
your messages, press 0
then 2 again within 15
seconds.
•If you enter an
incorrect security code
three times, you will
hear a beep and the
system will return to
standby.
•For your convenience, a
remote operation card
is provided for you to
use while away from
home (refer to page
92).
note
UP720.book Page 65 Wednesday, October 6, 2004 1:21 PM