Filter
Top Products
Setting up the Phone [8]
www.uniden.com
Setting up the Phone
Connect the base unit and charge the handset
1) Connect the AC adapter to
the DC IN 9V jack and to a
standard 120V AC wall
outlet.
2) Place the handset in the
base unit with the keypad
facing forward.
NOTE: The rechargeable
battery is already installed in your phone.
3) Make sure that the charge LED illuminates.
If the LED does not illuminate, check to see that the AC adapter is
plugged in and the handset makes good contact with the base
charging contacts.
4) Charge your handset at least 15-20 hours before plugging into
the phone line.
5) Once the handset battery
pack is fully charged, connect
the telephone line cords to
the TEL LINE jack and to a
telephone outlets.
•
Use only the supplied
AD-830 AC adapter. Do
not use any other AC
adapter.
•Do not place the power
cord where it creates a
trip hazard or where it
could become chafed and
create a fire or electrical
hazard.
•Don't place the base in
direct sunlight or subject
it to high temperatures.
The battery may not
charge properly.
If your telephone outlet
isn't modular, contact
your telephone company
for assistance.
note
UP720.book Page 8 Wednesday, October 6, 2004 1:21 PM