Filter
Top Products
10
Controls and Features
Projector Chassis Cover
To Open the Projector Cover:
1.
Locate the two black cover latches under the front edge.
2. Push the latches fi rmly IN toward the center of the unit. DO NOT FORCE THE TABS. It may be easier to loosen one side fi rst, then the
other.
3.
When the cover latches are loosened, then the top cover will swing upward and reveal the system control panel, cable connection panel
and more.
To Close the Projector Cover:
1. To close simply reposition the cover over the latches and press firmly, Latches will then snap closed.
2. IMPORTANT - When finished working under the cover and latches have been initially secured. Move the latches OUT TOWARD THE COVER
EDGES. This securely locks the cover to the projector.
Cover Latches