Filter
Top Products
28
V Shift Setting
1
Project image onto the screen
2.35:1 Cinemascope image
2
Press the [MENU] button
• The main menu is displayed on the screen.
ENTER
3
Press [
5
/
6
/6/
] to select “Options”, followed by pressing [ENTER]
• The “Options” menu appears on the right side of the screen.
TEST
PRESET
ENT
MUTE
LIGHT
2, 5
3, 4
2, 5
3, 4
4
Press [
5
/
6
/6/
] to select “V Shift”, followed by pressing [
3
/
4
] to
select the setting value
• Set value in the positive (+) direction to move the image upwards and
negative (-) direction to move downwards.
➭
4
Press the [MENU] button to end
• The menu will disappear from the screen.
When projecting images with black bands at the top and bottom such as a 2:35 Cinemascope image, use this to move the image up or
down while retaining one of the black bands at the upper or lower end.
E.g.: When “Picture Shift” value is changed
from “0” to “30”