13
3 OPERATION
The Bil-Jax Telescoping Boom Lift is equipped with multiple operator
control stations. Equipment power and outrigger controls are located at
ground level. Boom lift and rotation controls are located at ground level
and on the work platform.
Before attempting boom lift operation, Operators should:
Attend a training program as required by government regulations.
Obtain, read and obey all safety precautions as indicated by
manufacturer’s recommendations and all federal, state and local
regulations.
Become familiar with the location and use of all controls.
Verify that there are no overhead obstructions or live power sources
in the work area that could interfere with the safe operation of the
boom lift.
Position the boom lift on a firm and level surface.
Conduct a Pre-Operation inspection by performing all recommended
Daily Service Checks. Refer to Section 4.
Unhitch equipment trailer from the tow vehicle.
