BIL-JAX 2622T
32
Error Message
Displayed
Error Explanation &
Possible Causes
What To Check &
Corrective Action To Clear
Error
005 PLATFORM
CONTROL
HAS STUCK KEY
The Platform Control has detected a stuck or pressed
key on power up.
This is a latched error. To clear this error, first the
error condition must be removed and second the
power must be cycled off then back on.
NOTE: During this error condition, the Platform
Control “Engine On” LED will blink a “1 blink” error
code.
Possible causes include:
1. Platform Control has a stuck key
2. Faulty Platform Control
1. Free stuck or pressed key on Platform Control
2. Replace Platform Control
006 DRIVE CONTROL
HAS STUCK KEY
The Drive Control has detected a stuck or pressed key
on power up.
This is a latched error. To clear this error, first the
error condition must be removed and second the
power must be cycled off then back on.
NOTE: During this error condition, the Drive Control
“Engine On” LED will blink a “1 blink” error code.
Possible causes include:
1. Drive Control has a stuck key
2. Faulty Drive Control
1. Free stuck or pressed key on Drive Control
2. Replace Drive Control
007 DRIVE CONTROL
HAS STUCK JOYSTICK
The Drive Control has detected a stuck joystick on
power up.
This is a latched error. To clear this error, first the
error condition must be removed and second the
power must be cycled off then back on.
NOTE: During this error condition, the Drive Control
“Engine On” LED will blink a “2 blink” error code.
Possible causes include:
1. Drive Control has a stuck joystick
2. Faulty Drive Control
1. Free or replace stuck joystick on Drive Control
2. Replace Drive Control
008 GROUND CONTROL
HAS STUCK KEY
The Lower Control has detected a stuck or pressed
key on power up.
This is a latched error. To clear this error, first the
error condition must be removed and second the
power must be cycled off then back on.
NOTE: During this error condition, the Lower Control
“Power” LED will blink a “1 blink” error code.
Possible causes include:
1. Lower Control has a stuck key
2. Faulty Lower Control
1. Free stuck or pressed key on Lower Control
2. Replace Lower Control
009 BOOM UP WITHOUT
OUTRIGGERS ON
GROUND
The Lower Control has detected the boom is up
without all four outriggers on the ground.
This is a self clearing error. When error condition is
removed, error is cleared.
NOTE: Alarm will sound during this error condition.
Possible causes include:
1. Faulty boom down or outrigger limit switches
2. Faulty boom down or outrigger limit switch wiring
3. Faulty Lower Control
1. Check and repair boom and outrigger limit
switches
2. Repair or replace boom and outrigger limit
switch wiring
3. Replace Lower Control
