A SERVICE OF

logo

BIL-JAX 2622T
20
MANUAL BOOM OPERATION
Manual retraction, rotation and lowering functions
allow the Telescoping Boom Lift to be moved and
lowered during hydraulic power interruption or
failure. In each instance, refer to Figure 3-6.
The following procedures for manual retraction,
rotation and lowering require a person on the ground
to operate the manual controls and hand pump.
The hydraulic hand pump is located in the pump
compartment. In case of a power failure, the hand
pump and selected hydraulic valve settings can be
used to manually retract the Telescoping boom or
rotate the boom turntable.
To begin manual retraction or rotation, turn
Proportional Valve counterclockwise until it stops,
and insert pump handle into the pump handle fitting.
Manual Retraction
Pushing and holding the Retract button while
simultaneously actuating Hand Pump will retract the
extension boom section.
Manual Rotation
To rotate the turntable counterclockwise: Push
and hold the Rotation button and simultaneously
actuate Hand Pump.
To rotate the turntable clockwise: Pull the
Rotation button out and simultaneously actuate
Hand Pump.
NOTE: Return proportional valve to its original
position before lowering the lift or
resuming normal operation.
1. Hand Pump
2. Proportional Valve
3. Rotation Button
4. Retract Button
Figure 3-6. Hand Pump and Controls for Manual Lift Operation