ENGLISH
Remote
Control
Playback
(Advanced)
Connections
Simple
Version
Playback
(Basic)
Multi-
zone
GUISettings
Getting
Started
Troubleshooting
Other
Information
Spec. Index
Part
Names
Connections
Connecting to the Network
You can use a disc which offers BD-LIVE function by connecting the
unit to the Internet (vpage 21).
You can update by downloading the latest firmware from the DENON
website.
For more information, on the GUI menu, select “Other Setup” –
“Firmware Update” (vpage 46).
See “Network Setup” on the GUI menu (vpage 45) for more
information on network setting.
Cables Used for Connections
Cable (sold separately)
Ethernet
cable
Internet
Modem
Computer
Router
To WAN side
LAN port/
Ethernet
connector
To LAN port
To LAN port
For connections to the Internet, contact an ISP (Internet
Service Provider) or a computer shop.
•
•
•
n
Required system
Broadband Internet Connection
Modem
Device that connects to the broadband circuit and conducts
communications on the Internet.
A type that is integrated with a router is also available.
Router
When using this unit, we recommend you use a router equipped
with the following functions:
Built-in DHCP server
This function automatically assigns IP addresses on the LAN.
Built-in 100BASE-TX switch
When connecting multiple devices, we recommend a switching
hub with a speed of 100 Mbps or greater.
Ethernet Cable (CAT-5 or Greater Recommended)
Use for wired LAN.
Use only shielded STP or ScTP LAN cable which is available at
retailer.
Some flat type Ethernet cables are easily affected by noise.
We recommend using a normal type cable.
If you have an Internet provider contract for a line on which network
settings are made manually, make the settings at “Network Setup”
(vpage 45).
With this unit, it is possible to use the DHCP and Auto IP functions
to make the network settings automatically.
When using this unit with the broadband router’s DHCP function
enabled, this unit automatically performs the IP address setting and
other settings.
When using this unit connected to a network with no DHCP function,
make the settings for the IP address, etc., at “Network Setup”
(vpage 45).
When setting manually, check the setting contents with the network
administrator.
n
n
n
•
•
•
n
•
•
•
•
•
•
•
NOTE
A contract with an ISP is required to connect to the Internet.
No additional contract is needed if you already have a broadband
connection to the Internet.
The types of routers that can be used depend on the ISP. Contact an
ISP or a computer shop for details.
DENON assumes no responsibility whatsoever for any
communication errors or troubles resulting from customer’s
network environment or connected devices.
This unit is not compatible with PPPoE. A PPPoE-compatible router
is required if you have a contract for a type of line set by PPPoE.
Do not connect an ETHERNET connector directly to the LAN port/
Ethernet connector on your computer.
•
•
•
•
•
