ENGLISH
Remote
Control
Playback
(Advanced)
Connections
Simple
Version
Playback
(Basic)
Multi-
zone
GUISettings
Getting
Started
Troubleshooting
Other
Information
Spec. Index
Part
Names
Manual Setup
Set when changing Audyssey™ Auto Setup settings, or when changing the audio, video, display
or other settings.
If you change the speaker settings after performing Audyssey Auto Setup, it will not be possible
to set MultEQ
®
, Dynamic EQ™ and Dynamic Volume™ (vpage 51, 52).
Can be used without changing the settings. Please set if necessary.
Items that can be Set with the Manual Setup Procedure
Speaker Setup
v
page 53
HDMI Setup
v
page 55
Audio Setup
v
page 56
Option Setup
v
page 56
GUI Language
v
page 57
n
•
•
Speaker Setup
Default settings are underlined.
Perform this operation when manually setting the speakers, or when the changing the setting content in
“FIRST SETUP” (Audyssey Auto Setup).
Setting items Setting details
Speaker Assign
Set the speakers connected
to this unit. By performing
this setting, you can shorten
the automatic detection
time for the speakers during
“FIRST SETUP” (Audyssey
Auto Setup).
5.1CH : Set when using 5.1-channel (Front/Center/Surround/Subwoofer)
speakers.
2.0CH / 2.1CH : Set when only using front speakers and a subwoofer.
5.1CH + Surround Back : Set when using the 5.1-channel speaker and
surround back speaker.
5.1CH + Front Height : Set when using 5.1-channel speakers and front
height speakers.
Connect the surround back speakers or front height speakers to the
PRE OUT SURR. BACK connector (vpage 35).
Speaker Configuration
Select speaker configuration
and size (bass reproduction
capability).
NOTE
Do not use the outward
shape of the speaker to
determine selection of a
“Large” or “Small” speaker.
Instead, use the frequencies
set in “Crossover
Frequency” (vpage 55) as
the standard for determining
bass reproduction capability.
Front : Set the front speaker size.
Large : Use a large speaker that can adequately play back low
frequencies.
Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
•
•
Center : Set the presence and size of the center speaker.
Large : Use a large speaker that can adequately play back low
frequencies.
Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
None : Select when a center speaker is not connected.
•
•
•
Subwoofer : Set the presence of a subwoofer.
Yes : Use a subwoofer.
No : Select when a subwoofer is not connected.
•
•
Surround : Set the presence and size of the surround speakers.
Large : Use a large speaker that can adequately play back low
frequencies.
Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
None : Select when the surround speakers are not connected.
•
•
•
Remote control operation
buttons
Display the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
Confirm the setting Return to previous menu
