ENGLISH
Remote
Control
Playback
(Advanced)
Connections
Simple
Version
Playback
(Basic)
Multi-
zone
GUISettings
Getting
Started
Troubleshooting
Other
Information
Spec. Index
Part
Names
Manual Setup
GUI Language
Default settings are underlined.
Set the language for display on the GUI screen.
Setting details
English / Deutsch / Français / Italiano / Español / Nederlands / Svenska
Setting items Setting details
Dimmer Sensor
Detects the level of
brightness around the unit
and automatically adjusts
the brightness of the display
accordingly.
ON : Automatically adjusts the brightness of the unit’s display.
OFF : Does not automatically adjust the brightness of the unit’s display.
Dimmer
Adjust the display
brightness of this unit.
Bright : Normal display brightness.
Dim : Reduced display brightness.
Dark : Very low display brightness.
OFF : Turns the display off.
“Dimmer” can be set when “Dimmer Sensor” is set to “OFF”.
Setup Lock
Protect settings from
inadvertent change.
ON
OFF
When canceling the setting, set “Setup Lock” to “OFF”.
NOTE
When “Setup Lock” is set to “ON”, the settings listed below can no
longer be changed. Also, “SETUP LOCKED!” is displayed if you attempt
to operate related settings.
· GUI menu operations · Dynamic Volume™
· RESTORER · Audio Adjust
· Audio Delay · MultEQ
®
· Dynamic EQ™
Information
Show information about receiver settings, input signals, etc.
Items Setting details
Status
MAIN ZONE
This item shows information about settings for MAIN ZONE.
The information displayed differs according to the input source.
Select Source / Name / Surround Mode / Input Mode / Decode
Mode / Digital
n
Show information about
current settings.
ZONE2
This item shows information about settings for multi-zone.
Power / Select Source
n
Audio Input Signal
Surround Mode : The currently set surround mode.
Signal : The input signal type.
fs : The input signal’s sampling frequency.
Format : The number of channels in the input signal (front, surround,
LFE).
Offset : The dialogue normalization correction value.
Flag : This is displayed when inputting signals including a surround back
channel. “MATRIX” is displayed with Dolby Digital EX and DTS-ES Matrix
signals, “DISCRETE” with DTS-ES Discrete signals.
Dialogue normalization function
This function is automatically activated when
playing Dolby Digital sources.
It automatically corrects the standard signal level
for individual program sources.
The correction value can be checked using the
STATUS.
Rear
The figure is the correction value when the standard level is corrected.
Show information about
audio input signals.
HDMI Information
Signal Info.
Resolution / Color Space / Pixel Depth
Show information about
HDMI input/output signals
and monitor.
Monitor
Interface / Supported resol.
Remote control operation
buttons
Display the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
Confirm the setting Return to previous menu
