ENGLISH
Remote
Control
Playback
(Advanced)
Connections
Simple
Version
Playback
(Basic)
Multi-
zone
GUISettings
Getting
Started
Troubleshooting
Other
Information
Spec. Index
Part
Names
Network Setup
Default settings are underlined.
Set to connect to the Internet.
You can use a disc which offers BD-LIVE function by connecting the unit to the Internet (vpage 21).
To obtain update support for this unit, you can download the latest firmware from our website.
Make a network connect beforehand according to “Connecting to the Network” (vpage 16).
Setting items Setting details
DHCP
Set how to perform network
configuration, automatically
or manually.
Since the factory default
setting is “On”, you do not
need to set items such as
the IP address if the DHCP
server of the broadband
router is set to “Enable”.
Configure a proxy server if
necessary.
GOnH : Automatically configure the network by the
DHCP function.
GOffH : When connecting to a network, which does
not have the DHCP function, manually configure
the following network settings. For the details of
the settings, confirm with the provider or network
administrator. Use 0 – 9 to enter a value and then
press ENTER to finalize it.
Rear
IP Address : Manually set the IP address of this unit.
Subnet Mask : If the xDSL modem or terminal adaptor is directly
connected to this unit, enter the subnet mask notified by the provider
usually in a document. Usually, “255.255.255.0” is set.
Default Gateway : If the device is connected to a gateway (router),
enter its IP address.
Primary DNS : Enter the primary DNS.
Secondary DNS : Enter the secondary DNS.
•
•
•
•
•
Proxy
Set to connect to the
Internet via a proxy server.
GOffH : Do not use a proxy server.
GOn (Address)H : Set to connect to the Internet via a proxy server. Use the
address to specify the proxy server. Use 0 – 9 to enter the address and
then press ENTER to finalize it.
Port : Use 0 – 9 to enter a port number and then press ENTER to finalize
it.
GOn (Name)H : Set to connect to the Internet via a proxy server. Specify
the proxy server using the domain name. Input the domain name with the
virtual keyboard, using uio p and ENTER.
Port : Use 0 – 9 to enter a port number and then press ENTER to finalize
it.
•
•
IP Address
This unit’s IP address is
displayed.
If the IP address cannot be obtained or is not set, “···” is displayed.
In that case, check that the connection and network configuration is
correct.
MAC Address
Displays the MAC address
of this unit.
Ratings
Default settings are underlined.
Set Blu-ray Disc or DVD parental lock.
Setting items Setting details
Password
Sets the password for
changing the parental
control level and parental
control country code of Blu-
ray Disc and DVD.
Change : Change the password. Use 0 – 9 to enter a
password and then press ENTER to finalize it.
The default setting is “0000”. To clear the entered
password, press CLEAR.
Rear
BD Rating Level
Set the parental level for
playing Blu-ray Disc.
Level 0 – 254 : Set the age allowed to play back media. Restricts playback
of discs with relevant parental control.
No Limit : Do not restrict playing of Blu-ray Discs.
DVD Rating Level
Set the parental level for
playing DVD.
Lock All : Restrict playing of all DVDs.
Level1 – 8 : Set the parental level for playing DVD.
No Limit : Do not restrict playing of DVDs.
Rating Country Code
Sets the standard country
parental control.
Apply the parental level of
the set country.
Argentina / Australia / Austria / Belgium / Brazil / Canada / Chile / China /
Denmark / Finland / France / Germany / Hong Kong / India / Indonesia /
Italy / Japan / Korea, Republic of / Malaysia / Mexico / Netherlands /
New Zealand / Norway / Pakistan / Philippines / Portugal /
Russian Federation / Singapore / Spain / Switzerland / Sweden /
Taiwan / Thailand / United Kingdom / United States / Colombia /
Greece / Ireland / Luxembourg / Poland
Others : Inputs the country code. Refer to “Country Code List” (vpage
71) and, with the virtual keyboard, use 0 – 9 and ENTER to input the country
code. To clear the entered country code, press CLEAR.
Remote control operation
buttons
Display the menu
Cancel the menu
Move the cursor
(Up/Down/Left/Right)
Confirm the setting Return to previous menu
