keep
■ dhcp-relay option 82 keep
Species that no option 82 eld will be added or replaced, if option 82
eld(s) already exists in the client DHCP packet.
Next Available Options:
■ mac -- Sets the remote id to be the MAC address of the switch. This is the default value.(p. 163)
■ ip -- Sets the remote id to be the IP address of the VLAN on which the client request was
received.(p. 162)
■ mgmt-vlan -- Sets the remote id to be the IP address of the Management VLAN.(p. 163)
mac
■ dhcp-relay option 82 append mac
Sets the remote id to be the MAC address of the switch. This is the
default value.
■ dhcp-relay option 82 replace mac
Sets the remote id to be the MAC address of the switch. This is the
default value.
■ dhcp-relay option 82 keep mac
Sets the remote id to be the MAC address of the switch. This is the
default value.
■ dhcp-relay option 82 drop mac
Sets the remote id to be the MAC address of the switch. This is the
default value.
■ dhcp-relay option 82 validate append mac
Sets the remote id to be the MAC address of the switch. This is the
default value.
■ dhcp-relay option 82 validate replace mac
Sets the remote id to be the MAC address of the switch. This is the
default value.
■ dhcp-relay option 82 validate drop mac
Sets the remote id to be the MAC address of the switch. This is the
default value.
mgmt-vlan
■ dhcp-relay option 82 append mgmt-vlan
Sets the remote id to be the IP address of the Management VLAN.
■ dhcp-relay option 82 replace mgmt-vlan
Sets the remote id to be the IP address of the Management VLAN.
163© 2009 Hewlett-Packard Development Company, L.P.
dhcp-relayCommand Line Interface Reference Guide
