Hewlett-Packard 8200ZL Manual

A SERVICE OF

next previous

class

OVERVIEW

Category:

configPrimary context:

policy (page 398)Related Commands

Usage: [no] class <address-family> <name>

Description: Create a classier class and enter the class context.

Parameters are address family(ipv4 or ipv6) and class name.

COMMAND STRUCTURE

■ [no] class ipv4 -- Enter ipv4 class name (ASCII-STR) (p. 80)

■ [no] class ipv6 -- Enter ipv6 class name (ASCII-STR) (p. 80)

■ class resequence -- Renumber the entries in the class. (p. 80)

■ ipv4 -- Enter ipv4 class name (ASCII-STR) (p. 80)

■ start-seq-num < 1 to 2147483647 > -- Specify the starting sequence number. (p. 80)

■ incr-num < 1 to 2147483646 > -- Specify the increment. (p. 80)

■ ipv6 -- Enter ipv6 class name (ASCII-STR) (p. 80)

■ start-seq-num < 1 to 2147483647 > -- Specify the starting sequence number. (p. 80)

■ incr-num < 1 to 2147483646 > -- Specify the increment. (p. 80)

EXAMPLES

Example: class

“AdminTraffic” selects the administrative traffic sent to, and received from, the IPv4 address of an

administrator’s PC:

ProCurve(cong)# class ipv4 AdminTrafc

ProCurve(class-cong)# match ip 15.29.16.1/10 any

ProCurve(class-cong)# match ip any 15.29.16.1/10

ProCurve(class-cong)# exit

Example: class

“http” selects HTTP traffic sent to TCP ports 80, 443, and 8080, and excludes HTTP traffic sent to, and

received from, TCP port 1214:

ProCurve(cong)# class ipv4 http

ProCurve(class-cong)# match tcp any any eq 80

ProCurve(class-cong)# match tcp any any eq 443

ProCurve(class-cong)# match tcp any any eq 8080

ProCurve(class-cong)# ignore tcp any eq 1214 any

ProCurve(class-cong)# ignore tcp any any eq 1214

ProCurve(class-cong)# exit

COMMAND DETAILS

start-seq-num (p. 80)ipv6 (p. 80)incr-num (p. 80)

resequence (p. 80)ipv4 (p. 80)

79© 2009 Hewlett-Packard Development Company, L.P.