A SERVICE OF

logo

Open as PDF
next previous
VISORNET - Installation
I-27
Doc. DM245-I
Rev. 7.0
ZONE 0
ZONE 1
ZONE 3
ZONE 2
ZONE 5
ZONE 4
4
1
3
ON
5
6
7
8
ON
4
1
3
2
ON
4
1
3
2
ON
4
1
3
2
ON
4
1
3
2
ON
4
1
3
2
ON
4
1
3
2
SW1
SW3
ON
4
1
3
2
SW2
Figure 1.18. Configuration microswitches located on the underside of the device
itself
Micro. ON (down) OFF (up)
1 Activates the device test Deactivates the device test
2 Reserved Reserved
3 Activates loading through the console Deactivates loading through the console
4 Reserved Reserved
5 Activates the start up program prompt and
ignores the application configuration (the
applications uses a manufacturer’s configuration
by default).
Deactivates the start up program prompt. The
application uses the configuration previously
stored in the disk or in flash by the administrator.
6 Reserved Reserved
7 Reserved Reserved
8 Ignores the EEPROM configuration Does not ignore the EEPROM configuration
Position and use of the SW1 microswitches
For correct device operation, the microswitches need to be in the following position: