VISORNET – Appendix
II-33
Doc. DM245-I
Rev. 7.0
• Once the transfer has successfully completed, you will see that the B1
ISDN LED activates in green and the S LED continues flashing in
yellow, indicating that the recording process is in progress: if the S LED
passes to red the recording process has failed; if this passes to green the
recording process has finalized satisfactorily.
• Once the code has been successfully loaded, deactivate the microswitch
3 so the device will not pass to the wait mode once more to unload the
code through the Xmodem.
By default, the application loaded through the Xmodem is saved with the
name “VN860.BIN”; you can modify the name, following the instruction
that appears on the console when carrying out a load.
Loading through the console can also be carried out by accessing the BIOS
menus; in order to access the said menus you must press CTRL.-T when a
series of dots appear after the “>>” symbols.
=========================================================
ROUTER TELDAT VISORNET 4C
(c)Teldat
=========================================================
BIOS CODE VERSION: 01.01.12
CPU: MPC860 CLK=65536 KHz BUSCLK=32768 KHz
Date: 06/06/02, Thursday Time: 15:43:21
SDRAM size: 32 Megabytes
BANK 0: 16 Megabytes (detected)
BANK 1: 16 Megabytes (detected)
Caches: ON Write-Back
FLASH: 4 Mb.
NVRAM: 512 Kb.
EEPROM: 2048 Bytes.
UART RS232
UART RS485
FAST ETHERNET
JPEG CODEC
EXP2: VCP CARD
Current production date: 00 39
Current software license: 41 0
Current serial number: 370/00151
Xmodem whith chk transfer. Default baud rate: 115200
