Avaya 2050 Cell Phone User Manual


 
Page 18 – Contents
IP Office - 2030 & 2050 Phone 40DHB0002UKAG Issue 2a (13/11/2001)
DSS Keys
Setting Up a DSS Key
The 2030 and 2050 phones have eight DSS keys along their right-hand
edge. Each of these keys can store an extension number (or group
number for paging). They then allow you to dial those numbers in a single
key press.
You can also use DSS keys to dial your personal speed dial numbers (see
page 7).
To set a DSS/BLF key directory number:
1. Press PROGRAM and then the DSS key to use.
2. Enter the phone's passcode (see "The Phone Passcode" on page 26).
3. The display shows the current stored number (if set).
4. Press
CANCEL and dial the number to store.
5. Select another DSS key and enter the required details
6. Press
DONE then PROGRAM to finish.
Using DSS Keys
Once setup, you can use the DSS key for the following actions. You can
also use DSS keys to dial personal speed dial numbers (see "Storing
Personal Speed Dials" on page 7).
To make internal calls:
Press the DSS key storing the extension or group number.
To pickup calls:
Press the DSS key storing the ringing number (this will be giving a fast red
flashing for an extension or fast green flash for a group), the call details are
shown. Either press SPEAKER and then ANSWER RELEASE to answer
the call or just ANSWER RELEASE to cancel the pickup attempt.
To make a page call:
Press
PAGE and then the DSS key storing the extension or group
number. See "Making a Page Call" on page 5 for more information.