Filter
Top Products
16
11. GETTING STARTED
Important:
It is not allowed to install and charge the battery in hazardous areas.
Don‘t use the battery door from the Ex-CDMA 02 on a normal Kyocera phone
there is a danger of confusdion.
The battery door is a part of the protection only use it one the Ex-CDMA 02.
Your phone comes with a removable lithium ion (LiIon) battery. Fully charge
the battery before using the phone.
Installing the battery
1. Hold the phone facing away from you.
2. Use your fingernail to pull the circular
latch toward the bottom of the phone and
pull the battery door away.
3. Place the battery in the phone casing with
the metal contacts toward the top of the phone.
4. Place the battery door notches in the
openings near the bottom of the phone.
5. Press the circular latch until it clicks.
Charging the battery
You must have at least a partial charge in the
battery to make or receive calls. To charge the
battery, connect the AC adapter to the jack on
the lower right side of the phone, then plug the
adapter into a wall outlet.The battery icon in the
upper-right corner of the screen tells you
whether the phone is:
• Charging (the icon is animated)
• Partially charged
• Fully charged