Ecom Instruments Ex-CDMA 02 Cell Phone User Manual


 
3
1. Application
The EX-CDMA 02 is a mobile phone based on the CDMA standard for indus-
trial application in areas with an increased risk of explosion in Class I Div 2.
2. Safety information
These safety instructions contain information and safety regulations which
are to be observed without fail for safe operation in the described conditions.
Non-observance of this information and these instructions can have serious
consequences or may violate regulations.
Please read these operating instructions carefully before starting to use the
unit!
3. Faults and damage
If there is any reason to suspect that the safety of the unit has been impaired,
it must be withdrawn from use and removed immediately from the hazardous
area.
Measures must be undertaken to prevent it from being restarted accidentally.
We recommend that the unit is returned to the manufacturer for inspection.
The safety of the unit may be compromised, if, for example:
- there is visible damage to the housing.
- the unit has been subjected to excessive loads.
- the unit has been improperly stored.
- the unit has been damaged in transit.
- unit markings or inscriptions are illegible.
- malfunctions occur.
- permitted limit values have been exceeded.
4. Safety regulations
Use of this unit assumes that the operator observes conventional safety
regulations and has read the certificate in order to eliminate faulty operation
of the unit.
The following safety regulations must also be complied with:
- Before using the unit in hazardous areas, the charging interface must be
inspected for contamination and if required, cleaned with a brush or by
blowing off with compressed air.
- The battery compartment cover may not be opened inside the hazardous
area.
- The battery compartment cover is not allowed to use on non explosion
proved mobiles