Filter
Top Products
53
Using voice tags to place calls
1. If you haven‘t already done so, record a voicetag for the person you wish
to call.
2. From the home screen, press . The phone responds: „Say a name.“
3. Say the name of the person you want to call.
4. If the name you said matches a contact in the Voice Dial List, the phone
responds: „Calling (Name).“ Remain silent to make the call, or say „No“
to cancel. Note: If the phone finds multiple voice tags that sound like the
name you said, you will be asked to verify which name you want to call.
Say „Yes“ when you hear the correct name. Say „No“ when you hear an
incorrect name.
5. When you are finished, press . You cannot end the call with a voice
command.
Using voice features with hands-free car kits
You can use voice commands to make a phone call or to answer the phone
only if your phone is connected to a professionally installed hands-free car
kit (sold separately).
Note: The following features apply only to professionally installed hands-free
car kits unless noted.
Waking up the phone
If your phone is connected to a professionally installed hands-free car kit,
you can use a voice command to activate the phone to make a phone call.
Note: Voice Wake-up does not work with Keyguard active.
To activate the Voice Wake-up setting:
1. Select Menu ‡ Settings ‡ Voice Services ‡
Voice Wake-Up ‡ With ext. pwr.
2. Select = Menu ‡ Settings ‡ Keyguard ‡ Disabled, then press .
To wake up the phone:
1. Say „Wake Up“ and listen for a tone.
2. Say „Wake Up“ again until you hear two tones.
If the phone does not recognize your „Wake up“ command, see „Training
voice recognition“ on page 54.
Answering the phone
You can set the hands-free car kit to either (1)answer automatically or (2)
ring until you answer using a voice command.