Filter
Top Products
32 Reference Guide for the QCP 3035 Phone
Network
Digital or analog mode
1. Select Menu → Settings → Network → Digital or Analog.
2. Press in to select an option:
• Automatic—Automatically switches the phone between digital and analog.
• Analog only—Sets the phone to work in analog mode only.
• Analog call—Forces a call into analog mode for the duration of the next call.
• Digital only—Sets the phone to work in digital mode only.
Roam Option
This setting determines which signals your phone will accept.
1. Select Menu → Settings → Network → Roam Option.
2. Press in to select an option:
• Automatic (recommended setting)—Accepts any system the phone service
provides.
• No Roaming—Prevents you from making or receiving calls outside of your
home service area.
Roam/Service Alert
Use this setting to have the phone alert you when you roam outside of your home
service area.
1. Select Menu → Settings → Network → Roam/Srvc Alert.
2. Press in to select an option:
• Disabled—You are not alerted if you roam outside your home service area.
• When no service—Alerts you when service is lost. When service is
re-acquired, you will be alerted again.
• On roam change—Alerts you when roaming service is acquired. When
home area service is acquired again, you will be alerted again.
• On any change—Alerts you if there is a change in roaming service or if the
phone loses service.
Privacy Alert
1. Select Menu → Settings → Network → Privacy Alert.
2. Press in to select an option:
• Enabled—Plays an audible alert whenever enhanced privacy is lost or
regained and a call is in progress.
• Disabled—No alerts are used.
Note
An alert message always shows on the screen, regardless of these settings.