Filter
Top Products
User Guide 21
Keyguard
Enable Keyguard
Use Keyguard to lock the keypad immediately or
to automatically lock the keypad after a period of
inactivity to prevent accidental key presses.
From
Keyguard, select one of the following:
• to immediately lock the keypad.
• to lock the keypad after 30 seconds
of inactivity.
• to lock the keypad after 1 minute of inactivity.
• to lock the keypad after 5 minutes of inactivity.
Note: You can also activate Keyguard by pressing
and holding the
* Shift key.
Note: In a voice call or an active data call, user
cannot change the keyguard menu setting. User
will be prompted with "Feature can not be used
during a call". Only in dormant data session or
idle mode can the user make any changes to the
keyguard setting.
Unlock Keyguard
From the home screen, select Unlock and press
the
* Shift key to unlock the keypad.
Call Contact using Fast Find
1. From Fast find, select Enabled to turn
on fast find.
2. From the home screen, press the keys
corresponding to the letters of the name you
want to find. A matching contact or speed
dial entry appears.
3. Scroll to your desired contact and press the
Send key to call the number.
Enable Frequent List
From Frequent list, select Enabled. With
Frequent list enabled, the last 15 of your most
frequently called contacts appear at the beginning
of your contacts list. Scroll past the double line to
view the entire contacts list.
Answer Hold
Enable Answer Hold
Use Answer Hold to place incoming calls on hold
until you are ready to answer them.
1. From Answer Hold, select Enabled.
If you have not recorded a hold message, you
need to record one, such as “Please hold. I’ll
answer in a minute.”
2. Record the message twice, as prompted.
3. Select Save or Options and one of
the following:
–Play to replay your message.
– Re-record to record your message again.
–Exit to exit.
The next time a call comes in, you can place
it on hold.
82-L2611-1EN.book Page 21 Tuesday, February 3, 2009 5:33 PM