Filter
Top Products
User Guide 23
Set Digit Lengths
You can set the number of digits used for a phone
number in your voice dial list.
From
Digit lengths, select one of the
following options:
• North american recognizes only 7, 10, and
1 + 10 digits in a phone number.
• Permit all allows 4-14 digits in a
phone number.
Enable Voice Answer
You can set your phone to answer a call with your
voice when using a hands-free accessory.
1. From Auto answer, select Disabled.
2. From Ringer mode, select Normal sounds.
3. From Headset sound, select
Out of headset.
4. From Voice answer, select With accessory.
Enable Voice Wake-up
• From Headset sound, select Out of headset.
• From Voice wake-up, select With accessory
to activate voice dialling.
Note: You must use a headset or hands-free kit
and connect the AC adapter to the phone and the
wall outlet for voice wake-up to work.
Use Voice Training
If your phone has trouble recognizing your voice,
you can train your phone to recognize specifically
your voice for numbers.
1. From Voice training, read the message and
select
OK > Train numbers > OK.
2. Follow the prompts for each number until
training is complete.
Note: You must read the numbers digit by digit
for voice training to work.
Enable Auto-Answer
From Auto answer, select After 5 seconds. The
phone automatically answers after five seconds
with a headset attached.
Enable Any Key
From Any key, select one of the following:
• Any key mute to silence calls when
you press any key except for the
Send
or
Speakerphone key.
• Any key answer to answer calls when you
press any key except for the
End, Back, or
Navigation key.
Security
This section describes the security features on
your phone. You can adjust these features to
prevent access to your personal information. All
security features are shielded by a four-digit lock
code (typically 0000 or the last 4 digits of your
phone number).
82-L2611-1EN.book Page 23 Tuesday, February 3, 2009 5:33 PM