Filter
Top Products
22 Call options
Place a Call on Hold
You can place a call on hold with
Answer Hold enabled.
Note: If you are already on a call and you receive
another call, you cannot place the incoming call
on hold. With no call waiting enabled, the call
goes to
Voicemail.
When a call comes in, do the following:
1. Select Options > Answer Hold to place
the caller on hold with your recorded
hold message.
2. Select Answer to speak to the caller on hold
or
End Call to hang up without speaking.
Change Hold Call Message
1. From Answer Hold, select Re-record msg.
2. Record the message twice, as prompted.
3. Select Save to save the message or Options
and one of the following:
–Play to replay your message.
– Re-record to record your
message again.
–Exit to exit.
Use 1-Touch Dialing
The 1-Touch Dialing feature is the fastest way to
call a speed dial location. To call a contact with
speed dial, press and hold the speed dialing
location. If it is a two-digit location, press the first
digit briefly, then press and hold the second digit.
Note: To use 1-Touch dialing, you must enable
1-Touch dialing on your phone and have a speed
dial location assigned to a contact.
From
1-Touch dialing, select Enabled to
turn on 1-touch dialing.
Call options
Voice dialing
Use the following features to customize the
voice commands.
Enable Automatic Add
From Automatic add, select Enabled to
automatically add a contact to your voice dial list
when you create a new contact.
Set Expert Mode
Use Expert mode to speak a command after
you hear a tone instead of following the
initial voice prompts.
From
Expert mode, select one of the following:
•Normal sets the phone to default
voice prompts.
• Expert sets the phone to sound tones instead
of voice prompts.
Set Display Results
You can set the phone to display up to three voice
recognition contacts when calling or searching
for a contact with voice commands. From
Display
results
, select Single best or Three best.
82-L2611-1EN.book Page 22 Tuesday, February 3, 2009 5:33 PM