Filter
Top Products
27
| GENERAL FUNCTIONS
Answering a Call
When you receive a call, the phone rings and the
flashing phone icon appears on the screen. If the
caller can be identified, the caller’s phone number
(or name/photo, if stored in your Address Book) is
displayed.
1. Press the S key or the left soft key to answer
an incoming call. If the Any Key menu option
(Menu #-4-2), see p. 85, has been set, any key
press will answer a call except for the
E key or
the right soft key.
2. End the call by pressing the
E key.
! Note
You can answer a call while using the Address Book or
other menu features. In case the phone is connected with
a PC via the USB cable, incoming calls will be rejected, but
after you disconnect the phone from PC you will see the
Missed call window.
Vibrate Mode (Quick)
You can activate the manner mode by pressing and
holding down the L key.
Signal Strength
You can check the strength of your signal by the
signal indicator ( ) on the LCD screen of your
phone. Signal strength can vary, particularly inside
buildings. Moving near to a window may improve
reception.
Entering Text
You can enter alphanumeric characters by using
the phone’s keypad. For example, storing names
in the Address Book, writing a message, creating
scheduling events in the calendar all require
entering text. The following text input methods are
available in the phone.
T9 Mode
This mode lets you enter words with only one
keystroke per letter. Each key on the keypad has
more than one letter. The T9 mode automatically
compares your keystrokes with an internal
dictionary to determine the correct word, thus
requiring far fewer keystrokes than the traditional
ABC mode. This is sometimes known as predictive
text.
ABC Mode
This mode lets you enter letters by pressing the key
labelled with the required letter once, twice, three or
four times until the letter is displayed.
123 Mode (Numbers Mode)
Type numbers using one keystroke per number. To
change to 123 mode in a text entry field, press #
key until 123 mode is displayed.
Symbolic Mode
This mode allows you to enter special characters by
pressing * key shortly.
! Note
If you press # key for a long time, you can change the
language mode.
Changing the Text Input Mode
1. When you are in a field that allows characters
to be entered, you will notice the text input mode
indicator in the top right corner of the display.
2. If you want to change modes, press
#.
The available modes are changed.
Using the T9 Mode
The T9 predictive text input mode lets you enter
words easily with a minimum number of key presses.
As you press each key, the phone begins to display
the characters that it thinks you are typing based on
the built-in dictionary.