Filter
Top Products
86
SETTINGS
SETTINGS
|
Send my number [Menu #-4-3]
(network and subscription dependent)
• Set by network
If you select this, you can send your phone
number depending on two line service such as
line 1 or line 2.
• On
You can send your phone number to another
party. Your phone number will be shown on the
receiver’s phone.
• Off
Your phone number will not be shown.
Call waiting [Menu #-4-4]
(network dependent)
• Activate
If you select Activate, you can accept a waiting
(receiving) call.
• Cancel
If you select Cancel, you cannot recognize the
waiting (receiving) call.
• View status
Shows the status of Call waiting.
Minute minder [Menu #-4-5]
If you select On, you can check the call duration by a
beep sound given every minute during a call.
Auto redial [Menu #-4-6]
• On
When this function is activated, the phone will
automatically try to redial in the case of failure to
connect a call.
• Off
Your phone will not make any attempts to redial
when the original call has not connected.
Security [Menu #-5]
PIN code request [Menu #-5-1]
In this menu, you can set the phone to ask for the
PIN code of your SIM card when the phone is
switched on.
If this function is activated, you’ll be requested to
enter the PIN code.
1. Select PIN code request in the security settings
menu, and then press the left soft key
< [OK].
2. Set Enable/Disable
3. If you want to change the setting, you need to
enter PIN code when you switch on the phone.
4. If you enter wrong PIN code more than 3 times,
the phone will lock out. If the PIN is blocked, you
will need to key in PUK code.
5. You can enter your PUK code up to 10 times. If you
put wrong PUK code more than 10 times, you can
not unlock your phone. You will need to contact
your service provider.
Handset lock [Menu #-5-2]
You can use a security code to avoid unauthorised
use of the phone. Whenever you switch on the
phone, the phone will request security code if you
set phone lock to When switch on
.
If you set phone lock to When SIM changed, your
phone will request security code only when you
change your SIM card.
Auto key lock timeout [Menu #-5-3]
When you enable Automatic key lock, keypad will be
lock automatically on an idle screen depending on
the setting without any key requesting: Off, 10 secs,
15 secs, 30 secs, 45 secs, Backlight off
Call barring [Menu #-5-4]
The Call barring service prevents your phone from
making or receiving certain category of calls. This
function requires the call barring password which
is only available from your Service Provider. You can
view the following submenus.
• All outgoing calls
The barring service for all outgoing calls.