Filter
Top Products
28
GENERAL FUNCTIONS
|
GENERAL FUNCTIONS
You can also add new words in the dictionary. As
new words are added, the word changes to reflect
the most likely candidate from the dictionary.
! Note
You can select a different T9 language from the menu
option by holding down the
* key. The default setting on
the phone is T9 Disabled.
1. When you are in the T9 predictive text input mode,
start entering a word by pressing keys 2 to
9. Press one key per letter.
• The word changes as letters are typed-ignore
what’s on the screen until the word is typed
completely.
• If the word is still incorrect after typing
completely, press the down navigation key once
or more to cycle through the other word options.
Example: Press 4 6 6 3 to type Good.
• If the desired word is missing from the word
choices list, add it by using the ABC mode.
2. Enter the whole word before editing or deleting
any keystrokes.
3. Complete each word with a space by pressing the
key
0 or R key.
! Note
To exit the text input mode without saving your input,
press
E. The phone returns to the idle screen.
Using the ABC Mode
Use the 2 to 9 keys to enter your text.
1. Press the key labeled with the required letter:
• Once for the first letter.
• Twice for the second letter.
• And so on.
2. To insert a space, press the
0 key once.
! Note
Refer to the table below for more information on the
characters available using the alphanumeric keys.
Key
Characters in the order display
Upper Case Lower Case
1
. , / ? - : ' " 1 . , / ? - : ' " 1
2
A B C 2 a b c 2
3
D E F 3 d e f 3
4
G H I 4
g h i 4
5
J K L 5
j k l 5
6
M N O 6
m n o 6
7
P Q R S 7 p q r s 7
8
T U V 8
t u v 8
9
W X Y Z 9 w x y z 9
0
Space 0 [Long press] Space 0 [Long press]
Using the 123 (Numbers) Mode
The 123 Mode enables you to enter numbers in a text
message (a telephone number, for example).
Press the keys corresponding to the required digits
before manually switching back to the appropriate
text entry mode.
Using the Symbol Mode
The Symbol Mode enables you to enter various
symbols or special characters.
To enter a symbol, press the
* key. Use the
navigation keys to select the desired symbol and
press the [OK] key.