Filter
Top Products
Phone Basics
Dialing From the Contacts List
1. Press > Contacts.
2. Select the entry you want to call and press to
dial the entry’s default phone number.
– or –
To dial another number from the entry, select the
name and press , and then select a number and
press .
Using Speed Dialing
You can store up to 99 numbers in your phone’s speed
dial memory to make contacting friends and family as
easy as pressing a button or two. (See "Assigning
Speed Dial Numbers" on page 85.) With this feature, you
can dial speed dial entries using one keypress for
locations 1–9 or two keypresses for locations 10–99.
To use One-Touch Dialing for speed dial locations 1–9:
ᮣ
Press and hold the appropriate key for
approximately two seconds. The display confirms
that the number has been dialed when it shows
“Calling...”.
To use Two-Touch Dialing for speed dial locations 10–99:
1. Press the first digit.
2. Press and hold the second digit for approximately
two seconds. The display confirms that the number
has been dialed when it shows “Calling...”.
Note
Speed dialing is not available when you are
roaming; when you are roaming off the Sprint
National Network, you must always dial using
eleven digits (1 + area code + number).
Shortcut
From standby mode, press Contacts (right
softkey) to list entries.
Section 2A. Phone Basics 27