Filter
Top Products
To create a Group Connect member list:
1. Press > Contacts > Add New > New Group > Start
(left softkey).
2. Scroll through the available entries and press
after each entry you want to add to the Group.
(A check mark will appear in the box next to the
selected entry.)
3. When you’ve marked all the entries you want to add,
press Continue (left softkey).
4. Enter a name for the new Group and press .
5. Press Save(left softkey) to save the Group entry to
the Contacts list.
Adding Group Members to the Group
You can add a group member to an existing Group.
Each group can include up to 20 members. You can
enter a group member directly or select the member
from your Contacts or History.
1. Display the Contacts list and scroll to the Group you
want to add members to and press .
2. Press Options (right softkey)> Edit Group > Start (left
softkey) > Add More and press .
3. Highlight the DC-capable number for each member
you want to add and press after each selection.
(A check mark will appear in the box next to the
selected member.)
4. Press Continue(left softkey) to save the new
members.
5. Press Save(left softkey) to update the existing
Group.
Tip
Press the navigation key right or left to ensure that
each contact’s Direct Connect number is displayed
before selecting it. If the Direct Connect number is
not displayed, the contact name will appear in the
Group Connect entry, but Group Connect calls will
not include that member.
50 Section 2B. Nextel Direct Connect