Filter
Top Products
Section 2B. Nextel Direct Connect 43
Making a Group Connect Call On-the-Fly
1. Press > Contacts > Add New > New Group.
2. Press Start (left softkey) to add Contacts entries with
DC-capable numbers to the group.
Ⅲ
When adding a contact for the Group Connect
call, make sure you highlight the entry’s
DC-capable number (DC Only or Mobile + DC).
3. When you have finished selecting entries, press the
Direct Connect button.
4. Continue the Group Connect call as described
previously.
Joining or Rejoining a Group Connect Call
If you are not available at the beginning of a Group
Connect call, or if you drop off the call temporarily, you
can rejoin an in-progress Group Connect call.
1. Press > History.
2. Select the call and press the Direct Connect button.
3. Continue the Group Connect call as described
previously.
Setting Group Termination Options
1. Press > Settings > Direct Connect > Group Call
Options.
2. Select an option and press .
Ⅲ
End the call for everyone: terminates the call session
for all connected members.
Ⅲ
Allow the call to continue: keeps the call active even
after you hang up. The call will remain active until
the last members disconnect.
Tip
You can also join or rejoin a Group Connect call
from your Contacts list if the group has been stored.
Select the group entry and press the Direct
Connect button.
Note
If the Group Connect call has already ended,
pressing the Direct Connect button initiates a new
Group Connect call.
if you do not want to participate in a Group Connect
call, press END.
To see an updated number of group participants after
rejoining a call, press the Direct Connect button.
Direct Connect